Typology
Range of high power LED lamps with SMD technology and high efficiency chip.
The ellipsoidal shapes recalls that of discharge lamps that are replaced by the same fixtures.
The 1800K and 2400K versions are specially designed to produce a "sodium effect": the extremely warm light colour is perfect for lighting stone buildings and ancient squares.
Features
Innovative technological solution: the ballast has been separated into two parts to create a wide cooling zone and ensure long life.
50W and 70W versions are equipped with an E27 cap and and E40 adapter.
PF: 0.95.
Material
Thermally conductive plastic body and dissipator; opal polycarbonate anti-glare screen.
Applications
Suitable for outdoor use inside suitable fixtures.
Notes
Do not use with dimmer.
It can be used in closed fixtures.
30W and 40W: lamps suitable for installation and use in residential, commercial and light industrial environments, in systems with "Category I" of impulse withstand in compliance with CEI EN 64-8/4 (IEC 60364-4-44).
In case of installation in public areas, it is advisable to use overvoltage surge protection.
50W and 70W: models are designed to withstand voltage peaks up to 6KV.
Characteristic data
Dimensional characteristics
Lighting and photometric features
CCT nominal colour temperature
4000 K
Colour of the light
Natural light
Colour rendering index
>80
Heating time up to 60% of full efficiency
Instant Full Light
Electrical characteristics
Operating temperature
-25°C / +35°C
Equivalence with incandescent lamp
227
LED Warranty
G2
Up to 2 years
(4000h/year) *4000h = 11h a day x 365 days.
Without limitations on the duration of use for the first year, provided the observance of the installation conditions.
European Directives
2009/125/EC, 244/2009, 859/2009, 1194/2012,
2015/1428, 2010/30/EU, 874/2012, 2011/65/EU,
2012/19/EU, 2014/30/EU, 2014/35/EU, 2015/863
Product standards
CEI EN 55015:2020
CEI EN 60968:2016
CEI EN 61000-3-2:2019
CEI EN 61000-3-3:2014
CEI EN 61547:2010
CEI EN 62031:2009
CEI EN 62031/A1/A2:2015
CEI EN 62471:2010
IEC TR 62471-2:2009
CEI EN 62560:2013
CEI EN 62560/A1:2017
CEI 34-141:2014
Logistics data
Barcode single item
8011905950804
Number of pieces multiple pack
10
Barcode multiple pack
8011905952082
Product sheet
Tender text
Extended
Compact
L4040HP4 - ELLIPSOIDAL HIGH POWER
Typology
Range of high power LED lamps with SMD technology and high efficiency chip.
The ellipsoidal shapes recalls that of discharge lamps that are replaced by the same fixtures.
The 1800K and 2400K versions are specially designed to produce a "sodium effect": the extremely warm light colour is perfect for lighting stone buildings and ancient squares.
Features
Innovative technological solution: the ballast has been separated into two parts to create a wide cooling zone and ensure long life.
50W and 70W versions are equipped with an E27 cap and and E40 adapter.
PF: 0.95.
Material
Thermally conductive plastic body and dissipator; opal polycarbonate anti-glare screen.
Applications
Suitable for outdoor use inside suitable fixtures.
Notes
Do not use with dimmer.
It can be used in closed fixtures.
30W and 40W: lamps suitable for installation and use in residential, commercial and light industrial environments, in systems with "Category I" of impulse withstand in compliance with CEI EN 64-8/4 (IEC 60364-4-44).
In case of installation in public areas, it is advisable to use overvoltage surge protection.
50W and 70W: models are designed to withstand voltage peaks up to 6KV.
Characteristic data
Power: 40 W
Beam: 300°
Dimmable: No
Base: E27
IP: 20
Flux: 4000 lm
PF: 0,95
Tc: 4000 K
Ra: >80
LED Warranty: G2
Dimensional characteristics
Dimensiones
ø: 98 mm
H: 223 mm
Lighting and photometric features
Beam opening: 300°
Flux: 4000 lm
CCT nominal colour temperature: 4000 K
Colour of the light: Natural light
Colour rendering index: >80
Lifespan: 15000 h
LED lifespan: L70B20
Trigger time: <0,2 s
Heating time up to 60% of full efficiency: Instant Full Light
Mercury: 0 mg
Electrical characteristics
Rated power: 40 W
Frequency: 50 Hz
Dimmable: No
Power factor (PF): 0,95
Number of cycles: 30000
Operating temperature: -25°C / +35°C
Equivalence with incandescent lamp: 227
LED Warranty
G2: Up to 2 years
(4000h/year) *4000h = 11h a day x 365 days.
Without limitations on the duration of use for the first year, provided the observance of the installation conditions.
Standards and Directives
2009/125/EC, 244/2009, 859/2009, 1194/2012, 2015/1428, 2010/30/EU, 874/2012, 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 2015/863
CEI EN 55015:2020
CEI EN 60968:2016
CEI EN 61000-3-2:2019
CEI EN 61000-3-3:2014
CEI EN 61547:2010
CEI EN 62031:2009
CEI EN 62031/A1/A2:2015
CEI EN 62471:2010
IEC TR 62471-2:2009
CEI EN 62560:2013
CEI EN 62560/A1:2017
CEI 34-141:2014
Logistics data
Barcode single item: 8011905950804
Number of pieces multiple pack: 10
Barcode multiple pack: 8011905952082
L4040HP4 - ELLIPSOIDAL HIGH POWER
Typology: Range of high power LED lamps with SMD technology and high efficiency chip. The ellipsoidal shapes recalls that of discharge lamps that are replaced by the same fixtures. The 1800K and 2400K versions are specially designed to produce a "sodium effect": the extremely warm light colour is perfect for lighting stone buildings and ancient squares. Features: Innovative technological solution: the ballast has been separated into two parts to create a wide cooling zone and ensure long life. 50W and 70W versions are equipped with an E27 cap and and E40 adapter. PF: 0.95. Material: Thermally conductive plastic body and dissipator; opal polycarbonate anti-glare screen. Applications: Suitable for outdoor use inside suitable fixtures. Notes: Do not use with dimmer. It can be used in closed fixtures. 30W and 40W: lamps suitable for installation and use in residential, commercial and light industrial environments, in systems with "Category I" of impulse withstand in compliance with CEI EN 64-8/4 (IEC 60364-4-44). In case of installation in public areas, it is advisable to use overvoltage surge protection. 50W and 70W: models are designed to withstand voltage peaks up to 6KV. Characteristic data - Power: 40 W; Beam: 300°; Dimmable: No; Base: E27; IP: 20; Flux: 4000 lm; PF: 0,95; Tc: 4000 K; Ra: >80; LED Warranty: G2. Dimensional characteristics - Dimensiones; ø: 98 mm; H: 223 mm. Lighting and photometric features - Beam opening: 300°; Flux: 4000 lm; CCT nominal colour temperature: 4000 K; Colour of the light: Natural light; Colour rendering index: >80; Lifespan: 15000 h; LED lifespan: L70B20; Trigger time: <0,2 s; Heating time up to 60% of full efficiency: Instant Full Light; Mercury: 0 mg. Electrical characteristics - Rated power: 40 W; Frequency: 50 Hz; Dimmable: No; Power factor (PF): 0,95; Number of cycles: 30000; Operating temperature: -25°C / +35°C; Equivalence with incandescent lamp: 227. LED Warranty - G2: Up to 2 years ; (4000h/year) *4000h = 11h a day x 365 days. ; Without limitations on the duration of use for the first year, provided the observance of the installation conditions. Standards and Directives - 2009/125/EC, 244/2009, 859/2009, 1194/2012, 2015/1428, 2010/30/EU, 874/2012, 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 2015/863; CEI EN 55015:2020; CEI EN 60968:2016; CEI EN 61000-3-2:2019; CEI EN 61000-3-3:2014; CEI EN 61547:2010; CEI EN 62031:2009; CEI EN 62031/A1/A2:2015; CEI EN 62471:2010; IEC TR 62471-2:2009; CEI EN 62560:2013; CEI EN 62560/A1:2017; CEI 34-141:2014. Logistics data - Barcode single item: 8011905950804; Number of pieces multiple pack: 10; Barcode multiple pack: 8011905952082.
Picture
